JN15-24/31.5 Indoor Earthing Switch

An indoor earthing-switch family identified for 24 kV three-phase AC systems. Coordinate phase spacing, contact position and the operating-shaft interface with the switchgear. The complete nameplate designation and selected mounting variant must be confirmed together before ordering.

JN15-24/31.5 SERIES 24 KV COMBINED EARTHING SWITCH

JN15-24/31.5 Indoor Earthing Switch

An indoor earthing-switch family identified for 24 kV three-phase AC systems. Coordinate phase spacing, contact position and the operating-shaft interface with the switchgear. The complete nameplate designation and selected mounting variant must be confirmed together before ordering.

Application voltage
24 kV
Model-code short-time current
31.5 kA
Reference frequency
50 / 60 Hz
Phase-pitch options
210-275 mm
OVERVIEW

Earthing interface for 24 kV switchgear

The JN15-24/31.5 family is listed for indoor 24 kV equipment. Phase spacing, contact position and the operating shaft must fit the cabinet earthing and insulation layout. Approve the complete order designation and selected outline together. The mechanism, auxiliary contacts and interlocks are defined with the cabinet configuration.

TECHNICAL DATA

JN15-24/31.5 technical specifications.

Electrical ratings

JN15-24/31.5 electrical ratings
Electrical parameterSpecification
Product-family headingJN15-24/31.5 combined indoor earthing switch
Application voltage24 kV
Supply systemThree-phase AC
Reference frequency50 / 60 Hz
Model-code short-time withstand current31.5 kA; duration requires confirmation
Complete order designationConfirm the model suffix on the approved drawing and nameplate
Peak and making dutiesConfirm on the selected assembly electrical schedule
Insulation withstand levelsObtain model-specific values; do not reuse the 12 kV schedule
Drive and interlocksSelect with the complete equipment arrangement

Confirm the selected assembly, component ratings and verification documents. Family options do not describe every supplied configuration.

Operating arrangement

Specify the drive interface, operating position and interlocks with the switchgear layout. The switch is one component of the complete earthing arrangement.

JN15-24/31.5 functional-unit options
Selection itemDefine for the ordered assembly
Operating driveSpecify manual operation or a separately confirmed motor-drive package; no motor is assumed.
Shaft and linkageConfirm shaft projection, coupling, travel and the side from which the mechanism is operated.
Mechanical interlocksCoordinate the earthing switch with the main switching device, access doors and any withdrawable truck.
Position indicationDefine local indication and any auxiliary contacts required by the control scheme.
Earth connectionSpecify the conductor interface and connection to the assembly earth bar.

A mechanism, motor kit, voltage indicator or auxiliary switch is included only when it appears in the agreed bill of materials.

Operation & interlocks

Earthing function

Use the switch within the approved earthing and interlocking scheme for the equipment being maintained.

Switching duties

An earthing switch is not a substitute for a load-break switch or a circuit breaker. Check the making and withstand duties separately.

Access coordination

Confirm the permitted positions of the earthing switch, main switch and access doors in the project interlock schedule.

Commissioning records

Request the operating instructions, interlock verification record and electrical schedule for the delivered assembly.

Functional overview only. Qualified personnel must follow the approved isolation procedures and supplied operating instructions.

Define the equipment configuration.

Define the equipment duty and interfaces before requesting the project configuration.

JN15-24/31.5 configuration requirements
Configuration itemPurposeDefine for your project
Electrical dutySelect the applicable earthing-switch dutySystem voltage, frequency, prospective fault current and required duration
Mechanical layoutMatch the equipment interfacesPhase spacing, mounting drawing, shaft location and available clearance
Operating mechanismDefine what is deliveredOperating side, drive type, coupling and any confirmed accessories
Interlock schemeCoordinate access and switching positionsMain-device type, truck position if applicable, doors and auxiliary contacts
DocumentationCheck the selected assembly before manufactureApproved drawing, nameplate schedule, inspection records and operating instructions

Final components and scope of supply are defined in the project quotation.

Dimensions & interfaces

JN15-24/31.5 cabinet dimensions
Reference E pitch (mm)H dimension (mm)D dimension (mm)Order check
210655516Confirm complete drawing and suffix
220735536Verify H value on approved drawing
230810556Verify H value on approved drawing
250810596Verify H value on approved drawing
275810646Confirm complete drawing and suffix

The 24 kV reference drawing lists these dimensions, but the schedule uses a different model prefix and repeated H values. They are quotation references only. Obtain a corrected, approved outline before fabrication or installation.

yufang jn15 24 outline

Installation

Mounting interface

Check the selected phase spacing, hole pattern, mechanism envelope and shaft position against the approved assembly drawing.

Clearances

Coordinate the switch, busbars, cables and enclosure using the required insulation clearances for the selected voltage class.

Earth-bar connection

Confirm the connection size, termination details and assembly instructions with the switchgear design.

Inspection access

Allow access for the specified inspection and maintenance work without relying on the reference image as an installation drawing.

Site conditions

JN15-24/31.5 site conditions
ConditionRequirement / project input
LocationIndoor
Reference altitudeUp to 1000 m; confirm the selected application
Ambient temperatureProvide site minimum and maximum for written confirmation
Humidity referenceDaily average up to 95%
Environmental exposureState condensation, contamination, vibration and any special enclosure conditions

Provide any conditions outside the stated range before ordering. Final suitability requires project-specific confirmation.

APPLICATIONS

Where JN15-24/31.5 is used

24 kV indoor switchgear

Coordinate the contact positions, clearances and mechanism interface with the panel design.

Replacement in an existing panel

Check the installed geometry and electrical duty before selecting a mounting variant.

PLANNING EXAMPLE

Selecting an earthing assembly for a 24 kV panel

Planning example: the panel layout fixes the phase spacing and operating-shaft position. A confirmed drawing and order code are needed for that assembly.

Fix the drawing and designation

Obtain one confirmed model designation tied to the selected dimensions and electrical schedule.

Check panel interfaces

Review contacts, mounting, shaft, linkage and insulation clearances against the cabinet drawing.

Agree the operating scheme

Define earth connection, indication and interlocks with the main device and access doors.

MANUFACTURING & SUPPORT

Production, OEM and quality control

01 / PRODUCTION

Manufacturing

Production follows the approved drawings, the applicable product standards and the agreed inspection plan.

02 / CUSTOMIZATION

OEM & ODM

We can adjust the configuration for your operating environment and provide neutral packaging or your logo. Send the site conditions and branding requirements with your enquiry.

03 / QUALITY

Quality control

Incoming components, production work and finished units are checked against the requirements for the ordered configuration.

Inspection before dispatch

Material inspection

Incoming materials and components are checked against the approved specifications before production.

In-process checks

Assemblies and semi-finished components are inspected at the relevant production stages.

Final inspection

Finished equipment and release records are checked against the approved order requirements.

Factory acceptance testing (FAT). Every unit undergoes FAT before packing. Test items and acceptance criteria follow the product and approved configuration. FAT reports and packing inspection photos accompany the shipment. Factory attendance, video witnessing or independent inspection can be arranged with an agreed scope and schedule.

DOCUMENTS & ENQUIRY

Documents and quotation

Send your required ratings, installation conditions and quantity. We will confirm the configuration and documents for your quotation.

One order code linked to its electrical schedule.

Selected phase pitch, dimensions and shaft interface.

Applicable making, withstand and operating verification.

Before you request a quote

The complete designation must match the approved electrical schedule and outline drawing for the selected assembly. Confirm these together before ordering.

No. A higher voltage class does not establish mechanical interchangeability. Check contact position, phase spacing, shaft details and insulation clearance.

No. The listed H dimensions are reference values and are not yet confirmed for the selected mounting variant. Obtain the approved model-specific drawing before planning the installation.

It identifies a model-code current value. The required duration, peak withstand and making duty must be established separately.

Send the system voltage and frequency, fault-current duration, switchgear layout, selected phase pitch, operating-shaft details and required interlock sequence.